joggle

Definitions:

  • A jolt; a jog.
  • In <em>carpentry</em>, a stub-tenon on the end of a post or piece of timber, which prevents the timber or post from moving laterally. Also <internalXref urlencoded="joggle-joint">joggle-joint</internalXref>.
  • In <em>carp</em>, and <em>masonry</em>, a notch in a piece of timber or stone, into which is fitted a projection upon a corresponding piece or counterpart, or a key also engaging a notch in a corresponding piece or counterpart, to prevent one piece from slipping on the other.
  • In <em>iron ship-building</em>, to make a joggle in (a plate or bar).
  • To shake slightly; give a sudden but slight push; jolt; jostle.
  • In <em>carp</em>, and <em>masonry</em>, to fit together, as timbers or stonework, with notches and projections, or with notches and keys, to prevent the slipping of parts upon one another.
  • To move irregularly; have a jogging or jolting motion; shake.
  • In <em>mech.</em>:
  • A pin or tenon projecting from a casting to hold it when set in place.
  • A raised rib or ridge on which rests a plummer-block or other bearing.
  • In <em>iron ship-building</em>, a setting back of part of a plate or of a bar to obtain a flush surface where other parts cross, or to enable it to fit around a projection, as a butt-strap.
  • To shake or totter; to slip out of place.
  • To shake slightly; to push suddenly but slightly, so as to cause to shake or totter; to jostle; to jog.
  • To join by means of joggles, so as to prevent sliding apart; sometimes, loosely, to dowel.
  • A notch or tooth in the joining surface of any piece of building material to prevent slipping; sometimes, but incorrectly, applied to a separate piece fitted into two adjacent stones, or the like.
  • a joint in any kind of building material, where the joining surfaces are made with joggles.
  • To shake slightly; to push suddenly but slightly, so as to cause to shake or <xref>totter</xref>; to <xref>jostle</xref>; to <xref>jog</xref>.
  • To <xref>jog</xref> or run while <xref>juggling</xref>.
  • A step formed in material by two adjacent reverse bends.
  • A <xref>notch</xref> or <xref>tooth</xref> in the joining surface of any piece of building material to prevent <xref>slipping</xref>.
  • a fastener that is inserted into holes in two adjacent pieces and holds them together
  • move to and fro
  • fasten or join with a joggle
  • a slight irregular shaking motion
powered by